Installing An Interface Card - Nortel Versalar 15000 Installing And Maintaining

Installing and Maintaining the Versalar Switch Router 15000

Installing an Interface Card

You can install an interface card with the power on or off.
Caution: Electrostatic discharge can damage hardware. Attach the antistatic
wrist strap before handling any Versalar 15000 components.
To install an interface card:
Attach the antistatic wrist strap.
1.
For instructions, see "Attaching the Antistatic Wrist Strap" on
Locate the slot where you want to install the interface card
2.
If an interface card air flow module is installed in the slot, remove it.
3.
4-14
page 4-3.
(Figure 4-9).
308684-B Rev 00