Figure 4-7. Installing A Processor Card - Nortel Versalar 15000 Installing And Maintaining

Captive
screws
Figure 4-7.
7.
8.
9.
308684-B Rev 00
Installing Processor and Interface Cards and Connecting Equipment
Installing a Processor Card
Insert the card until its connector panel touches the Versalar 15000 back
panel.
Press both card handles in at the same time until the card moves further
into the chassis.
Using a flat-tip screwdriver, tighten the 2 captive screws to secure the
processor card to the chassis.
Card
handles
VRS0024A
4-11