Connecting A Terminal With A 25-Pin Comm Port To The Console Port - Nortel Versalar 15000 Installing And Maintaining

Connecting a Terminal with a 25-pin Comm Port to the Console Port

To connect a terminal to the console port, you need the following items, which are
shipped with the Versalar 15000:
•
•
To connect a terminal to the Versalar 15000:
1.
Table 4-2.
Parameter
Baud rate
Data bits
Stop bits
Parity
308684-B Rev 00
Installing Processor and Interface Cards and Connecting Equipment
Serial console cable with 9-pin receptacle to 25-pin plug connectors
(Order No. 110307)
Null modem crossover adapter with two 25-pin receptacle connectors
(Order No. 110308)
Turn on and configure the terminal, using the parameters in
Refer to the terminal user manual for instructions.
Terminal Parameters
Value
9600
8
1
None
Table 4-2.
4-29