Figure 4-15. Connecting A Coaxial Cable To The T3 Interface Card - Nortel Versalar 15000 Installing And Maintaining

To lock a coaxial cable to the T3 connector:
1.
2.
3.
Figure 4-15. Connecting a Coaxial Cable to the T3 Interface Card
308684-B Rev 00
Installing Processor and Interface Cards and Connecting Equipment
Gently push the coaxial cable onto the T3 connector
Turn the coaxial cable to the left until the key on the T3 connector clicks
into the notch on the coaxial cable.
Bundle the cables for each slot to facilitate card installation and removal.
Refer to your cable management policy for bundling information.
1
2
(Figure 4-15).
3
BAC0060A
4-23