5.
Figure 3-13.
Removing or Installing an AC Power Module
6.
7.
308684-B Rev 00
For instructions, see
Grasp the handle of the replacement module with one hand and the
power supply handle with the other
B
A
Using both hands, gently guide the new power supply module into the
desired slot along the side guides.
Using a flat-tip screwdriver, tighten the captive screw until the power
module is seated firmly.
"Removing an AC Power
(Figure
Installing Power Supplies
Module" on page 3-22.
3-13).
Power
supply handle
Captive
screw
Power
supply handle
VRS0126A
3-21