Installing and Maintaining the Versalar Switch Router 15000
Muting an Alarm
An alarm mute button is located on the SSP interface Ethernet card and the SSP
interface console card.
the SSP interface console card.
Pressing the alarm mute button disables the external visible or audible alarm.
Pressing the button after disabling it has no effect. To re-enable the alarm after
muting it, you must use system console software intervention.
Alarm
mute
button
Figure 5-3.
5-6
Figure 5-3
Pwr
Pwr
SSP Interface
Cosole
Maj
Min
Min
Maj
Alarm
Mute
Mute
Alarm Mute
Console
Console connector
Alarm
Min NO
Min COM
Alarm terminal block
Min NC
Maj NO
Maj COM
Maj NC
Alarm Mute Button
shows the location of the alarm mute button on
SSP Interface
Console
Alarm
BAC0008A
308684-B Rev 00