Hardware For Mounting The Versalar 15000 In An Equipment Rack; Figure 2-2. Sc Duplex To Sc Duplex Cable - Nortel Versalar 15000 Installing And Maintaining
Switch router
Hide thumbs
Also See for Versalar 15000:
- Hardware description (325 pages) ,
- Reference manual (214 pages) ,
- Terminology (152 pages)
Table of Contents
Advertisement
Installing and Maintaining the Versalar Switch Router 15000
Figure 2-2.
SC Duplex to SC Duplex Cable
Hardware for Mounting the Versalar 15000 in an Equipment Rack
To install the Versalar 15000 in an equipment rack, you need a Phillips
screwdriver and a rack that meets the following specifications:
•
Heavy-duty steel construction
•
Electronic Industries Association (EIA) standard hole-spacing
•
Four-post rack with width of 19 in. (48.26 cm) and depth of 24 in. (60.96 cm)
•
Four-post rack with width of 23 in. (58.42 cm) and depth of 24 in. (60.96 cm)
•
Two-post rack with width of 19 in. (48.26 cm)
If the rack does not have threaded rail holes, you must use the supplied cagenuts
(see
2-6
Figure
2-1) with the cagenut screws.
9 ft
(2.7 m)
CAB0035A
308684-B Rev 00
Advertisement
Table of Contents
