Connecting A Pc With A 9-Pin Comm Port To The Console Port - Nortel Versalar 15000 Installing And Maintaining

Connecting a PC with a 9-pin Comm Port to the Console Port

To connect a PC to the console port, you need the following item, which is
shipped with the Versalar 15000:
•
When you have the correct equipment, complete the following steps:
1.
Table 4-3.
Parameter
Baud rate
Data bits
Stop bits
Parity
2.
308684-B Rev 00
Installing Processor and Interface Cards and Connecting Equipment
Serial console cable with 9-pin receptacle connectors
(Order No. 117296-A)
Turn on and configure a comm port on the PC, using the parameters in
Table 4-1.
Refer to the PC user manual for instructions.
PC Parameters
Value
9600
8
1
None
Insert the 9-pin receptacle end of the console cable into the console
connector on the SSP interface console card (Figure 4-20).
4-31