Powering Down The System - Mitel MiVoice Office 250 Installation And Administration Manual

MiVoice Office 250 Installation and Administration Guide
c. Plug in the external voice mail system, if equipped. For information on attaching an external
voice processing system, see page 333.
9. If applicable (first-time installation), follow the initial system startup in accordance with the section
titled, "Setting Initial System Configuration" on
ming chapter in the MiVoice Office 250 Features and Programming Guide.

Powering Down the System

To power down the system:
1. Make sure Database (DB) Programming is not running. If DB Programming is running when
you make programming changes using the LCD panel, the changes will not be updated until
the system is restarted.
2. From the LCD panel, press the down arrow twice to navigate to the System menu.
3. Press the center button once to access the System menu, then press the down arrow until you
get to the Shutdown menu.
4. Press the center button once to access the Shutdown menu.
5. At the prompt, press the down arrow once to select the Yes option.
6. Press the center button to execute the Yes option. The system reboots.
If the system does not power down, do not unplug the power cord. If the system hangs up, you
NOTE can force the power off by pressing—all at the same time—the center LCD panel button and the
right arrow and left arrow buttons.
248
page 1-166. Otherwise, continue to the Program-