Programming An Sla For Dual Did Trunks - Mitel MiVoice Office 250 Installation And Administration Manual

Hide thumbs Also See for MiVoice Office 250:

Table of Contents

Figure 4: SLA Terminations for Single Line Phones with a U.S. System

Phone Modular

Jack Assembly

AC Transformer

If a single line phone is located near the SLA, it can be plugged directly into the unit.

Programming an SLA for Dual DID Trunks

You can use an SLA to install DID trunks on the MiVoice Office 250. The trunks coming in from the

CO [local exchange] attach to the SLA that has been programmed for Dual DID functionality on a

DEM-16 port.

To program an SLA for dual DID trunks:

1. Open a session in the System Administration & Diagnostics application.

2. From the DB Programming screen, select System – Communication Server – Digital Expansion

Interface # <n> – Bay <n>: that is equipped with a Digital Endpoint Module - 16.

3. In the right-side pane, click an available Port and from the drop-down menu click Dual DID. The

Create DID Extension window displays (not shown).

Standard Reversing

Mod-to-Mod Line Cords

Single Line Phone Modular

Jack Assemblies

Installation

To Single Line

To Single Line