Installing The Usb Security Key And Compact Flash-Type Memory Card - Mitel MiVoice Office 250 Installation And Administration Manual

MiVoice Office 250 Installation and Administration Guide
Installing the USB Security Key and Compact Flash-Type
Memory Card
Locate the security key and compact flash-type memory card that came with the system. (With v3.2
or later software, the Base Server chassis can use a serialized compact flash-type card instead of
a USB security key. See page
and the applications necessary to operate the system. There are no application licenses on the
security key; the key indicates that the system is able to download the corresponding license it needs
to operate. For additional information about the USB security key and compact flash-type memory
card, see the Specifications
NOTICE
Version 3.x requires a minimum 512 MB compact flash-type memory card. Version 4.0 or later requires
a minimum one GB compact flash-type memory card. The 512 MB card is not supported with v4.0 or
later.
NOTICE
Possible Memory Card Corruption: By adhering to the following precautions you can help prevent
corruption of data on the compact flash-type memory card:
• Do not remove or install the compact flash-type memory card while the system is up and running or
power is otherwise supplied to the Mitel 5000 chassis, as this may damage the memory card. Shut
down the system using the LCD panel and unplug the power cord before removing or inserting the
memory card.
• Using any compact flash-type memory card other than one provided by Mitel is not supported.
• Do not place the compact flash-type memory card into any other PC. Doing so may corrupt the file
system and software.
To install a USB security key and compact flash-type memory card:
1. Using the illustration on the next page as a guide, insert the USB security key in the USB port
labeled "KEY." Write down the key number (for example, on a sticker you can place above the
key location on the chassis).
The security key has changed over time. Newer keys are shorter than the previous security key.
Table 30
details the differences and compatibilities of the keys with the MiVoice Office 250
chassis.
USB Security Key
a
New key
d
Existing key
a. Part number: 841.0892
b. Recessed USB port labeled "KEY"
c. No recessed USB ports.
d. Part number: 841.0219
150
page 45 for details.) The memory card contains system software files
and Product Description
Table 30: USB Security Key Port Compatibility
Chassis
b
Original CS chassis
c
Newer CS chassis
Original CS chassis
Newer CS chassis
chapters.
Compatibility
Insert new key into a non-recessed port (USB-A).
Do not insert into port labeled KEY.
Insert into any USB port.
Insert into port labeled KEY.
Insert into any USB port.