Equipment And Materials; Special Tools And Equipment - Eclipse EA500 Maintenance Manual

Component to be Tested
Standby Pitot/Static probe
Right and left OAT probes

2. Equipment and Materials

Barfield Pitot/Static Tester (Barfield, DPS450) or Barfield Pitot/Static Tester (Barfield, DPS500)
or Equivalent Tester.
Air Data Accessories Kit (NavAids P/N ADA500MD-945) (or) Air Data Accessories Kit ; (Nav
Aids PN ADA500945) (Note: If using ADA500–945, covering pitot probes with tape is required)
Stop Watch (Inotek, EH365528) or Equivalent (Note: Calibrated with 1 second resolution)
Weight-on-Wheels (WOW) Box (EAI, 87-117390-1001) or Avio Maintenance Computer (AMC)
(EAI 20-120576-1001 or 20-121926-1001), SW version "1.5.71 or higher" for Pre-Avio NG
aircraft and "2.2.02 or higher" for Avio NG aircraft (for Weight off Wheels simulation)
Vinyl Tape (To cover drain hole on Pitot probes)
Ground Power Unit (GPU). AllStar 450 or AllStar G.S.E. or Hobart GPU-400 or Hobart GPU-
600 or Bycan PS-28100 (Note: 28.0 ± 0.5 VDC)
EFFECTIVITY: NOTED
EA500 Aircraft Maintenance Manual — 06-117751
Standby Pitot/Static Probe System Leak Test
AMM-34-10-00-071-701-002, Standby Pitot/Static Probe
Verification Test (Effectivity Noted)
AMM-34-10-00-071-701-006
AMM-34-10-00-071-701-007
Pitot and Static Anti-Ice System - Adjustment/Test.
If software only is replaced, perform the following: Standby
Pitot/Static Probe Verification Test (Effectivity Noted)
SUBTASK AMM-34-10-00-071-701-006
AMM-34-10-00-071-701-007.
Outside Air Temperature Test
AMM-34-10-00-071-701-008.
Table 502. Special Tools and Equipment
Name and Part Number
© 2020 Eclipse Aerospace, Inc.
Temporary Revision No. 34-21
Test
SUBTASK
SUBTASK
or SUBTASK
and AMM-30-30-00-071-801 –
or SUBTASK
SUBTASK
34-10-00
Sep 30/20
Page 502