Operation of restore
This section describes the restoration operation screen.
The screen operation procedure varies depending on the PLC CPU type and password status. For the details of the operation
procedure, refer to the following.
Page 205 Security and password
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
214
15.8 BACKUP/RESTORE
1.
Touch [Restore].
2.
Select the CPU unit to be restored by pressing a switch
(among [CPU No. 1], [CPU No. 2], [CPU No. 3] and
[CPU No. 4]). When the connected equipment is an FX
CPU, touching any switch (among [CPU No. 1], [CPU
No. 2], [CPU No. 3] and [CPU No. 4]) is invalid.
3.
Touch [Execute].
4.
When the left screen appears, touch [YES].