Setting Operation - Mitsubishi Electric GOT SIMPLE Series User Manual

Setting operation

Touch the numerical part
of the octet to be changed.
Touch
Touch[×]
Touch [YES]
1.
Touch the numerical part of the octet to be changed
among the 1st to 4th octets.
2.
When the ten-key pad appears, enter a numerical value
in up to 3 digits, and touch the
value outside the setting range is entered, the following
error message appears. Enter a numerical value again.
For the details of the setting range, refer to the following.
Page 261 Specifications
3.
The changed IP address is displayed. At this time, the
changed communication set value of the FX3U-ENET-
ADP is not written to the CPU. Touch the [ ] key.
4.
When the screen shown on the left appears, touch the
[YES] key.
16 GOT SELF CHECK (DEBUG)
16.3 FX3U-ENET-ADP Communication Setting Function
key. If a numerical
16
263