Mitsubishi Electric GOT SIMPLE Series User Manual page 83

For Standard I/F-4(Ethernet)
Communication parameter setting by drawing software
Set the communication parameter for each communication driver by selecting [Common]
Setting].
GT Designer3 (GOT2000) Screen Design Manual
1.
Touch the driver display box of a communication parameter to be
set.
2.
The screen is switched to the communication detail setting. Set the
communication parameter on this screen.
GOT IP address setting
Page 84 GOT IP Address Setting
3.
When the [ ] button is touched, it returns to the previous screen.
4.
Touch the [ ] button to display the window confirming whether to
save the settings.
5.
Touch the [YES] button to save the settings and restart. Touch the
[NO] button to discard the changes.
11 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
[Controller
11.1 Standard I/F Setting
11
81