Mitsubishi Electric GOT SIMPLE Series User Manual page 220

Restoration
Error
Setting data (files and data) cannot be written into
the controller.
The restoration cannot be executed because
passwords for files of the controller are set.
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
218
15.9 Errors and Corrective Actions
Cause
The GOT cannot communicate with the controller.
The target controller of the restoration is a different
kind of controller from the target controller of the
backup.
• The passwords for files written in the controller
are changed.
Corrective action
Check the following.
GOT
• Check if the cable is correctly connected to the
GOT.
• Check if the correct communication driver is
installed on the GOT.
• Check if the communication settings are
correctly set.
Controller
• Check if the parameters are set.
• Check if the cable is correctly connected to the
controller.
• Check if the controller is turned on.
• Check if the system configuration for the
restoration is the same as that for the backup.
• Check if the target controller of the restoration is
the same as that of the backup or the same kind
of controller.
Check with the administrator of the system
regarding the passwords for files of the controller.