Operation Of Backup - Mitsubishi Electric GOT SIMPLE Series User Manual

Operation of backup

This section describes the backup operation screen.
The screen operation procedure varies depending on the PLC CPU type and password status. For the details of the
operation procedure, refer to the following.
Page 205 Security and password
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
212
15.8 BACKUP/RESTORE
1.
Touch [Backup].
2.
Touch [Execute]. Touching any switch (among [CPU No.
1], [CPU No. 2], [CPU No. 3] and [CPU No. 4]) is invalid.
3.
When the left screen appears, touch [YES].
4.
When the left screen appears, touch [OK], and input the
password on the key window.