Mitsubishi Electric GOT SIMPLE Series User Manual page 194

Operation of SD card format
Restrictions on formatting
• When using an unformatted SD card in the GOT, format it by a personal computer. The GOT cannot format
the unformatted SD card.
• The format of the GOT does not change the file system (Example: FAT16) of the SD card and inherits the
file system before the format.
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
192
15.5 SD Card Format
1.
Install an SD card to the GOT. For installation/removal
procedure of an SD card, refer to the following.
Page 61 Installation/removal procedure of SD card
2.
Touch and select the drive to format by drive selection.
3.
If touch the [FORMAT] button, the password input
screen is displayed.
4.
Type and touch the [Enter] key. The dialog
1 1 1 1
box shown on the left will appear. (The password is fixed
to 1111.) Confirm the contents of the dialog box, and
touch the [YES] button to format the SD card. To cancel
the format, touch the [NO] button.
5.
When the formatting is completed, the completion dialog
mentioned left is displayed.
6.
To close the dialog box, touch the [OK] button.