Mitsubishi Electric GOT SIMPLE Series User Manual page 64

Removal
Precautions when removing the SD card
• Do not pull out the SD card or power OFF the GOT while the SD card access LED is lit. To do so may cause
data corruption or malfunction.
• When removing the SD card from the GOT, make sure to support the SD card by hand as it may pop out.
Failure to do so may cause the SD card to drop from the GOT, resulting in a failure or break.
8 OPTION
62
8.1 SD Card
1.
Touch [Main Menu]
[Permissions] to set [Access inhibit].
Page 190 SD Card Access
Check that the SD card access LED turns off.
When the SD card access LED is off, the SD card can be
installed or removed even when the GOT is on.
2.
Push the SD card all the way inside and leave your
finger once, then remove the SD card.
[Data] [SD card access]