Regist - Mitsubishi Electric GOT SIMPLE Series User Manual

Regist

Keyword is registered.
Touch
Touch
Touch
1.
Touch "Regist" to display the selection screen for the registration.
For the FX series PLC, which is not compatible with Customer
Keyword, the keyword entry screen of [Step3] is displayed. Start
the operation from [Step3]. For the Customer Keyword
compatible models, refer to the manual of the PLC to be used.
2.
Select [Keyword] or [Keyword+Custom]. To register only
Keyword and 2nd keyword, touch [Keyword]. To register
Customer Keyword, touch [Keyword+Custom].
3.
Input a keyword. Touch the display part of the keyword to be
registered.
4.
The keyboard for entering a keyword is displayed. Character
types to be input can be changed by touching the [KEY] button.
Enter a keyword and touch the [ENT] key. For the keyword, 8
digits from 0 to 9 or A to F must be set.
Touch
5.
After completing the keyword entry, touch [Next]. When
[Keyword+Custom] is selected on the selection screen for the
registration, the Customer Keyword entry screen is displayed.
Enter it in the same way as for Keyword and 2nd keyword.
11 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
11
97
11.7 Keyword