Operation Of Data Copy - Mitsubishi Electric GOT SIMPLE Series User Manual

Operation of data copy

Touch
Touch
Touch
Touch
1.
Select the copy direction. The selection mark is
displayed on the side of the selected key.
GOT SD card:
Copy the data from the GOT to the SD card.
SD card GOT:
Copy from the SD card to the GOT
2.
After selecting the direction, touch the [OK] button. To
abort copy, touch the [ABORT] button.
3.
Confirm the copy direction and copy target. When they
are set correctly, touch the [OK] button. To change the
setting, touch the [CANCEL] button.
4.
The dialog box on the left is displayed for confirmation.
Touch the [YES] button to start copying and [NO] button
to abord.
5.
While the copy is executed, the dialog box on the left is
displayed.
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
15
195
15.7 Data Copy