Mitsubishi Electric GOT SIMPLE Series User Manual page 152

Setting procedure for the time setting
■Current time
Carry out the display and setting of GOT clock data.
The setup methods of clock data are shown below.
1.
Touch either the date or time to be changed.
Touch the item
to be changed.
2.
Enter date or time on the ten-key pad.
The day of the week is displayed automatically according to the input date.
The following shows the setting range of the date.
Jan. 1, 2000 to Dec. 31, 2037
"0" to "9":
Use these keys to enter numerical values
"ESC":
Closes the ten-key window without saving any value entered for the date or time
"AC":
Deletes the entire string of numerical characters that are being entered
"DEL":
Deletes a digit from a string of numerical characters that are being entered
"ENT":
Enters the value for the date or clock that has been entered and closes the ten-key pad window
"+/-":
Switches between positive and negative values. (Only positive values are valid for the date or clock setting.)
"." :
Invalid key (not used)
3.
After setting either the date or time, touch the [×] button to save the changes and close the setting window.
14 CLOCK SETTINGS (TIME SETTING AND DISPLAY)
150
14.1 Time Setting and Display