Display Operation - Mitsubishi Electric GOT SIMPLE Series User Manual

Display operation

Operation to display
The following describes the outline for displaying the operation screen of the MELSEC-FX list editor.
Display the utility.
After the utility is displayed, touch
[Debug]
from the main menu.
For how to display the utility, refer
to the user's manual of the GOT to
be used.
When no keyword
is registered in the
connected FX PLC
The MELSEC-FX list editor is started.
*1 For information on how to set a special function switch, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
*2 For details on the operation method, refer to the following.
Page 256 Keyword
• How to display the utility
For how to display the utility, refer to the following.
Page 64 Utility Function List
• If the project data has not been downloaded
The MELSEC-FX list editor can be started from the utility even if the project data has not been downloaded to
the GOT.
16 GOT SELF CHECK (DEBUG)
236
16.2 FX List Editor
Turn on the power to the GOT.
Starting from the utility
[MELSEC-FX List editor]
Start
Starting from the special function
switch (MELSEC-FX list editor)
set in the project data
Touch the special function switch.
End
*1
When a keyword is
registered in the
connected FX PLC
Enter the keyword. *2