Universal Terminal Layout - Hardi SMARTCOM ISOBUS UT SW A.2.2 Series Original Instruction Book

3 - Description

Universal Terminal Layout

In the following the main Universal Terminal layout is described.
Display Symbols
1. The 1st line is for status symbols, register number and alarm
number. All status symbols are described on next page.
μ
ATTENTION! If an error occurs, the alarm/warning error number
will be shown instead of register number.
The alarm/warning number can be recognized by an
exclamation sign in front of the number.
2. The 2nd line are icons for boom status, foam marker, end nozzles
and a visual tank level indication.
Nozzles spraying.
Nozzles spraying and awaits to close.
Nozzles not spraying.
Nozzles not spraying and awaits to open.
End nozzles spraying.
End nozzles OFF.
3. The bottom half has 6 boxes with information, whereof 5 boxes are selectable. The upper left box always show the
actual volume rate.
See "Menu 2.1 Display readout" on page 46 for setup of the display readouts in the bottom half of the Terminal display.
14