Working In The Field; Spraying With Dynamicfluid4 Pressure Regulation; Autoselect Usage - Hardi SMARTCOM ISOBUS UT SW A.2.2 Series Original Instruction Book

Table of Contents

Advertisement

Working in the Field

Spraying with DynamicFluid4 Pressure Regulation

Start up procedure and steps done by the sprayer driver when beginning a spray job is simple. At the headland you basically
just turn spraying on by pressing the main ON/OFF and start driving.
But there are a few things you will need to keep in mind and check before starting spraying:
• The controller always start up in automatic mode when turned on.
• If by some reason the
beginning any spraying.
• Do not adjust the pressure before and while spraying, as the controller does this automatically.
• Keep an eye to the regulation valve LED's to check that it operates properly.
The regulation valve is equipped with 4 LED's as indication of valve status:
LED Colour
Valve Status
Green
Open and in work range.
The valve disc is open and in its normal working range. This is normal state when spraying.
Yellow
Valve closed.
The valve disc is closed or starts to open, and is within the normal working range.
2 x Red
Out of working range.
The valve disc is out of its normal working range. This does not happen when the regulation valve works correctly. The software will
prevent the valve to go out of range, also when manually operated.

AutoSelect Usage

The AutoSelect buttons are available in the submenu of the
menu.
AutoSelect Buttons
Line A manual selection.
Line B manual selection.
Both lines (A+B) selection.
AUTO mode.
AutoSelect Status Icons
In the illustration line A is active in automatic mode (A).
Read about the status icons in "AutoSelect" on page 31.
Use of AutoSelect
Presumed that all settings are done as described in "AutoSelect" on page 78, you can simply press one of the buttons to
select the preferred nozzle setup, and start spraying.
or
has been pressed, the controller enters manual mode. Then press
5 - Operation
V o l u m e r a t e
S p e e d
P r o g . r a t e
l i t e r / h a
k m / h
l i t e r / h a
V o l u m e r a t e
V o l . s p r a y e d
l i t e r
T a n k c o n t .
l i t e r / h a
l i t e r
before
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartcom isobus ut sw a.2.2.53

Table of Contents