Hardi SMARTCOM ISOBUS UT SW A.2.2 Series Original Instruction Book page 103

FastFlush
1. Go to AutoWash by pressing
2. Press
to enter FastFlush.
3. Begin driving in the field just sprayed. Spray at normal driving
speed to avoid overdosing.
4. Press
to start the program.
5. In field (A), drive approximately 800 metres (9 km/h) until FastFlush
has finished.
μ
ATTENTION! For sprayers with FlexCapacity pump, the controller
prompts when to turn the pump ON/OFF during the FastFlush/MultiRinse program.
÷
NOTE! External fill hoses from injector to External filling coupler and to suction SmartValve is not flushed. This contains
approximately 8 litres.
The following diagram show the valve positions during the FastFlush program.
Pre-start MainTank emptying
11:18
12:18
13:18
14:18
15:18
17:18
18:18
.
Pressure
SmartValve
A
Suction Main
Spray
SmartValve
ON/OFF
5 - Operation
CycloneFilter Agitation
Boost Line Valve
Valve
103