Calibration And Troubleshooting - ILX Lightwave LDT-5900 Series User Manual

5
C H A P T E R
C T
ALIBRATION AND ROUBLESHOOTING
This chapter describes calibration and troubleshooting of the LDT-5900 Series
Temperature Controllers. Descriptions of the required test instruments, calibration
conditions, and detailed procedures for calibration of the temperature controllers
are included. A troubleshooting guide is also offered for common failure problems.
ILX Lightwave Corporation provides in-house and on-site calibration services for
ILX instruments. Most ILX instruments require yearly calibration to ensure
performance to published specifications. ILX factory calibrations employ NIST
traceable measurement instrumentation, and our calibration engineers and
technicians use automated test equipment to accurately and efficiently capture
and record calibration data. An original certificate of calibration authenticity is
provided with all instrument calibrations, and a detailed report showing any pre-
calibration out-of-tolerance conditions is available upon request. Calibration turn-
times are normally five business days or less. On-site calibrations can be
performed around your production schedule, night or day, seven days a week.
Please contact ILX Customer Support (see Comments, Suggestions, and
Problems on page xii for contact information) for additional calibration information.
For further assistance with technical solutions and troubleshooting, visit the
www.ilxlightwave.com Support Library for Application Notes and Technical Notes.
117
LDT-5980/ 5948