ILX Lightwave LDT-5900 Series User Manual page 130

4
C H A P T E R
TRIGger:IN:START?
Action
Response
Notes
Example
TRIGger:IN:STEP
Action
Parameters
Notes
'
Example
TRIGger:IN:STEP?
Action
Response
Notes
Example
TRIGger:IN:STOP
Action
Parameters
Notes
Example
114
LDT-5980/ 5948
C O M M A N D R E F E R E N C E
Com ma nd Reference
The TRIGger:IN:START? query returns the value of the starting temperature setpoint.
The response is a single value that represents the starting temperature setpoint, in
TRIG:IN:START? response: 20, means the starting temperature setpoint is 20
The TRIGger:IN:STEP size command sets the temperature step size.
An <nrf value> that represents the desired temperature step size is required, in
step size values range from -100
To increase temperature from the starting point, a positive step size must be entered.
To decrease temperature from the starting point, a negative step size must be entered.
TRIG:IN:STEP 1.505 action: Sets the temperature step size to 1.505
The TRIGger:IN:STEP? query returns the value of the temperature step size.
The response is a single value that represents the temperature step size, in
TRIG:IN:STEP? response: 1.505, means the temperature step size is 1.505
The TRIGger:IN:STOP command sets the stopping temperature setpoint.
An <nrf value> that represents the desired stopping temperature setting is required,
o
in C.
Valid input range is limited to the settings for LIM:TEMP:HI and LIM:TEMP:LO. If a trigger
is sent after the stop temperature is reached, the temperature will return to the starting
temperature.
TRIG:IN:STOP 40 action: Sets the stopping temperature setpoint to 40
o o
C to +100 C.
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
o
C.
o
C.
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
o
C. Valid
o
C increments.
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
o
C.
o
C.
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
o
C.