Save / Recall - ILX Lightwave LDT-5900 Series User Manual

2
C H A P T E R

SAVE / RECALL

The Save / Recall menu functions are used to quickly configure the LDT-5900
Series Temperature Controller's parameters to user-determined pre-set values.
SAVE
The Save function is used to store the current instrument configuration into non-
volatile memory. When a configuration is stored, all of the parameter values (PIDs,
sensors, limits), trigger settings and setpoint values are saved. There are nine (9)
"bins" for user storage. Bin 0 is reserved for the factory default parameters. (See
"Default Settings" in Chapter 2) Bins 1-9 can be used to save any desired
configuration for later use. This allows fast and easy setup for tests or other high-
repeatability needs. The system GPIB address and RS-232 baud rate are not
saved in the user bins.
To save a configuration, repeatedly press the SELECT key until the SAVE /
RECALL LED is illuminated. Use the adjust knob to select an appropriate storage
bin and then press the ENTER / LOCK key.
Once a configuration has been properly saved, the following will be displayed:
28
LDT-5980/ 5948
O P E R A T I O N S
Front Pa nel Opera t ion
LDT-59XX
Save 0: [1]
Recall: 00
LDT-59XX
Save 0: [1] Success
Recall: 00
TEMPERATURE CONTROLLER
TEMPERATURE CONTROLLER