ILX Lightwave LDT-5900 Series User Manual page 107

LIMit:ITE:HIgh?
Action
Response
Notes
Example
LIMit:ITE:LOw
Action
Parameters
Notes
Example
LIMit:ITE:LOw?
Action
Response
Notes
Example
LIMit:SENsor
01_10
The LIMit:ITE:HIgh? query returns the value of the upper TE current limit value.
The response is a single value that represents the upper current limit.
The current limit is in effect in all control modes.
LIM:ITE:HI? response: 0.9, means the upper current limit is 0.9 A.
The LIMit:ITE:LOw command sets the lower TE current limit value.
An <nrf value> that represents the lower limit current, in Amps.
Maximum current limit is dependent on the instrument model and cable type.
LIM:ITE:LO 4.0 action: the lower current limit is set to 4.0 A.
The LIMit:ITE:LOw? query returns the value of the lower TE current limit value.
The response is a single value that represents the lower current limit.
The current limit is in effect in all control modes.
LIM:ITE:LO? response: 0.9, means the lower current limit is 0.9 A.
The LIMit:SENsor: command path is used to access the sensor limit commands. The
following commands may be reached directly from the LIMit:SENsor: command path.
LIMit:SENsor:HIgh
LIMit:SENsor:HIgh?
LIMit:SENsor:LOw
LIMit:SENsor:LOw?
C O M M A N D R E F E R E N C E
Comm a nd Reference
4
C H A P T E R
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
91
LDT-5980/ 5948