ILX Lightwave LDT-5900 Series User Manual page 117

MESsage
Action
Parameters
Notes
Example
MESsage?
Action
Response
Example
MODE
Action
Parameters
Notes
Examples
MODE?
Action
Response
Notes
Examples
*OPC
Operation Complete
Action
Response
Example
01_10
Stores an ASCII string into non-volatile memory.
String is 1 to 15 non-zero ASCII characters. Strings longer than 15 characters will
generate an error. The message should be contained within " ".
Useful as a "scratchpad" for storing intermediate test status or configuration information.
MES "test complete" action: stores the string "test complete" into non-volatile memory.
The MESsage? command queries the status of the message.
The response value is a 15 character long string.
MES? response: "test complete" means a previously stored message was "test
complete".
Selects the feedback control mode for the instrument.
One <character data value> representing the control mode is required. The values
accepted are T, SENSOR, VTE, ITE, and CAL.
Changing modes forces the output off.
MODE SENSOR action: changes the control mode to sensor (which is equivalent to
R on the front panel.)
snsr
The MODE? query returns the selected control mode.
The response is a character response representing the control mode. The possible
responses are "T", "SENSOR", and "ITE, "VTE" or "RAC" (without quotes).
"SENSOR" mode is equivalent to "R
MODE? response: T, means that the controller is in constant temperature control mode.
Sets the operation complete bit in the Event Status Register when all pending overlapped
commands have been completed.
None.
*OPC
C O M M A N D R E F E R E N C E
Comm a nd Reference
" mode from the front panel.
snsr
4
C H A P T E R
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
101
LDT-5980/ 5948