ILX Lightwave LDT-5900 Series User Manual page 91

CONST:
CONST:ICI
Action
Parameters
Notes
Example
CONST:ICI?
Action
Response
Notes
Example
CONST:ICV
Action
Parameters
Notes
Example
01_10
The CONST: command path is used to access the calibration constant commands and
queries.
The following commands may be reached directly from the CONST: command path:
CONST:ICI CONST:ICI?
CONST:ICV CONST:ICV?
CONST:RTD CONST:RTD?
The CONST:ICI command sets the slope and offset coefficients for a current IC sensor.
Two <nrf values> are required. The first represents the slope in µA/K and the second
represents the offset (in µA).
Acceptable values for slope are 0 to 99.99 µA/K. Acceptable values for offset range
between 9.99 and +99.99 µA. Current IC coefficients are typically supplied by the
manufacturer.
CONST:ICI 2.5,0 action: enters a slope of 2.5 µA/K and an offset of 0 A for the ICI
coefficients.
The CONST:ICI? query returns the slope and offset coefficients for a current IC sensor.
The response is two values. The first represents the slope. The second represents the
offset.
CONST:ICI? response: 2.5,0 means a slope of 2.5 µA / K and an offset of 0 µA for the
current IC sensor coefficients.
The CONST:ICV command sets the slope and offset coefficients for a voltage IC sensor.
Two <nrf values> are required. The first represents the slope in mV / K and the second
represents the offset (in mV).
Acceptable values for slope are 0 to 99.99 mV / K. Acceptable values for offset range
between -9.99 and +99.99 mV.
CONST:ICV 4.2, -3.0 action: enters a slope of 4.2 mV / K and an offset of -3.0 mV for the
ICV coefficients.
C O M M A N D R E F E R E N C E
Comm a nd Reference
4
C H A P T E R
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
75
LDT-5980/ 5948