[Alignment] - Ricoh Ri 2000 User Manual

③ JIG HEAD MAINTENANCE - using the supplied head cleaning jig and cleaning pads – this
operation will automatically clean the white carriage or the color carriage. After this button is
selected – a screen will pop up allowing you to select which carriage you want to clean. The
printer will prompt for the Jig head clean on the white carriage every 3 days and the color
carriage every 10 days
④ REGULAR MAINTENANCE _ Allows carriage to be released, cover can be opened (during
maintenance or troubleshooting) allowing the cleaning of the maintenance station. After this
button is selected – a screen will pop up allowing you to select which maintenance station you
want to clean the white or the color. Printer will prompt for this cleaning every 3 days for white
and every 10 days for color
⑤ MAINTENANCE LIST - hitting this button will show will shows when Jig Head maintenance,
Regular maintenance, and Monthly Maintenance (rod cleaning) was last performed and the %
of the time interval between cleaning for each the white and the color systems. (For example if
white jig head maintenance is at 50% then it is half when in time between the last time
maintenance was performed and the next time it will need to be performed – a pop up alert
will appear). Once maintenance is performed highlight the line and hit the clear button to reset
to the % 0 and enter the date and time for that maintenance.

[Alignment]

RICOH Ri 2000
User Manual
32