Ricoh Ri 2000 User Manual page 112

CAUTION:
Be sure to use the Cleaning Applicator that come with the printer or can be ordered from
Ricoh and the Ricoh Grease type G1
This grease is designed for this purpose and the applicators are lint free – use of incorrect
grease and the accumulation of lint can cause the carriage to malfunction and need to be
replaced if the guide rods are not cleaned and greased correctly
Step 7 As shown in Fig. 1,
<The Guide Rod: main> Apply approximately 0.01 ml (small dab) of grease to each of the six
peripheral parts of the arrow.
<The Guide Rod: front> The six peripheral parts of the arrow.
After putting grease, apply it to the full range of the dot-dash line and adjust it.
Refer to Fig. 2 and Fig. 3 for the circumferential grease application range of the Guide Rod.
<Sample amount of grease to be applied >
to six places each rod
RICOH Ri 2000
User Manual
112