Ricoh Ri 2000 User Manual page 55

How to scale, size and position graphics on the platen
[Job]->[Settings...]->[Job]tab
Item
Scale1:1 Original size – uncheck this to change
the graphic size (note the graphic must
fit on the plate)
Proportional Keep aspect ratio and can resize the
graphic once Scale 1:1 has been
unchecked
Height/Width Specify size
*If proportional is still checked - if the
Height of Width is changed the other
will change automatically
Scale (%) Image scaling – unchecking the Scale
1:1 box allows you to adjust the size
either by the Height and width or by
changing the Scale %
Unchecking the Proportional box allows
you to change the height and width
independently
Offset x Left/Right/Center
horizontally – Where the graphic will
start printing on the platen from right to
left
*Or enter value in text box
Offset y Top/Bottom/Center on the media
vertically – where the graphic will start
printing from top to bottom
*Or enter value in text box
Again you must select OK to make the sizing and position changes happen - if not the changes will
not take affect – Once you select OK you will see the changes take affect on the preview.
Description
on the media
RICOH Ri 2000
User Manual
Image
55