[Status Panel] - Ricoh Ri 2000 User Manual

⑥ Print Start button – Will move the table into the back of the printer and start the print job if one
is ready in the preview window.
⑦ Preview window – displays a preview of the job that is ready to print. Will show the image and
the file name. The number underneath represents the number of copies to be printed. The arrow
to the right of the number increases the number of copies. The arrow to the left reduces the
number of copies. When a job is first loaded the number of copies will be set to 1.
⑧ Adjust Height button- The table will be scanned by the media sensor and the table height will be
adjusted for optimal printing. You need to perform the adjust height function when the printer
is 1 turned on and when changing the type of material you are printing on. For example – T
st
shirt to sweatshirt. This operation will adjust for the material thickness. Printer will require this
is done after start up and daily before printing is enabled.
⑨ STOP- will stop any current movement of the table and allows to cancel print job
⑩ Function Tabs at the bottom of the screen allow you to move to different screen with different
functions and buttons

[Status Panel]

When the down arrows described in 2 above are taped - this screen will show
① Displays the printer status in detail, shows any warnings or errors
② Displays current ink levels in % for each installed cartridge - ink will appear as colors – cleaner
cartridges will display as clear – if no cartridge is installed X and NC will appear
RICOH Ri 2000
User Manual
30