Ricoh Ri 2000 User Manual page 100

RICOH Ri 2000
User Manual
<Cleaning the Suction Cap>
The method of cleaning the Suction Cap is the same as Step 3 the cleaning method of the Moisturizing
Caps.
However, there is a vacuum cap inset in the cap, clean it carefully so as not to shift or detach this part.
Be sure to return the parts when the parts in the cap are displaced or removed. Press down until the
spring bottoms out.
If not returned properly, it may cause nozzle out.
See Fig. 4 and Fig. 5 for the figures before and after cleaning. Wipe off any excess cleaning liquid with a
dry applicator if necessary.
For parts inside the Suction Cap, it is sufficient that the solid ink or the stuck ink is removed.
<Cleaning the Wiper and Wiper Cleaner>
1. Cleaning the frame top of the Wiper Cleaner
Clean of the frame top surface indicated by the yellow line in FIG. 6.
An example of how to apply the Cleaning Applicator is shown in Fig. 7.
Fig. 6
Fig. 7
2. Cleaning the surface and the inside parts of the Wiper Cleaner
100