Download Software Of Colorgate Rip And Mim Files; Start Rip Software; License Update - Ricoh Ri 2000 User Manual

Download software of ColorGate RIP and MIM files.

2. Go to the RicohDTG website again
Download the MIM package (.cmp file extension) for the Ri 2000 (the site will also have a package for
the Ri 1000 but this will not work for the Ri 1000).
Place this file in a location on your PC that you can retrieve it when you 1
3. Then you will need to get the installation executable file – go to
4. Download the file PS10Setup.33.XXXX
5. Run the executable file and the installation wizard will walk you through the install
6. At the end of the installation you will be asked to restart your computer and after restart the
Production 10 icon will appear on your desktop

Start RIP Software

1. Insert the USB dongle to an USB port on the computer.
2. Click Windows mark on left bottom on your pc.
3. Click Productionserver10 -> Productionserver10 .

License Update

4. The following dialog will open when an update is available for your license when the software is started. It
will appear if you have received your final activation key after product registration (the fourth email in the
user and product registration process). If you do see it select "Start Update..." .
https://anajet.com/colorgate
RICOH Ri 2000
User Manual
.
st
set up the software
https://anajet.com/colorgate
.
42