Ricoh Ri 2000 User Manual page 39

3. In the Ethernet Adapter Ethernet section, use the IP address but change the last 3 digits to a
number that will be unique to the printer and the Subnet Mask. In the example below, we took the
169.254.248.172 and will assign 169.254.248.174 to the printer
4. Enter the new IP address and the subnet mask into the printer by going to the settings tab, options
IP Address (DHCP must be disable)
A. Go to the settings config on the Ri 1000
B. Select the OPTION under the settings tab
C. Select the IP ADDRESS option in the menu dialogue box
RICOH Ri 2000
User Manual
39