Ricoh Ri 2000 User Manual page 114

・Do not allow grease to adhere to the carriage
・
Step 8 Move the carriage to the left and right by hand, to smooth the grease.
Move the carriage slowly over 2 seconds within the designated sliding range,
and move it more than two round trips.
CAUTION:
Do not move the carriage to the sliding prohibited range which is outside the designated
sliding range.
Since the wiper of the Maintenance Unit is raised to the Wiper cleaning position,
when the carriage is moved to above the Maintenance Unit, the Wiper interferes with the
Head, it may damage the Head.
Step 9 Wipe away grease that protrudes far beyond the coverage of Fig. 1, 2 and 3.
Also, confirm that grease is not attached to the Filler Sensor.
RICOH Ri 2000
User Manual
114