Circulation; Empty The Waste Ink Bottle - Ricoh Ri 2000 User Manual

• After agitating cartridges, insert the cartridges and hit Yes

3.6 Circulation

This printer has the function of white ink circulation that moves the white ink in the system from the
•
ink bay to the printhead and back. This is used to avoid the white ink settling within the lines and
provides quality white ink prints. This will occur every hour

3.7. Empty the Waste Ink Bottle

• The printer comes with a 3 L waste ink bottle that the two waste tubes drain into that you set below
the printer when it was installed. One tube comes from the white maintenance station. One tube
comes from the color maintenance station.
• You can check the amount of waste ink on the [Status Panel] and reset the waste ink counter.
When the waste tank becomes nearly full you will receive a warning. When it is full the machine will
•
be in error and no printing or auto maintenance can happen
To reset the waste ink counter, after the waste ink tank has been emptied, press [WASTE INK RESET]
•
button.
Attention! Once the waste ink bottle is full, auto maintenance will not occur, and head clogging can
occur.
Attention
 Do not reset the waste ink tank warning WITHOUT emptying the waste ink tank, this will avoid
any spilling or other potential hazards
RICOH Ri 2000
User Manual
108