Agitating The 4 New White Cartridge Qty 2 W1 And Qty 2 W2 - Ricoh Ri 2000 User Manual

Agitating the 4 New White Cartridge QTY 2 W1 and QTY 2 W2

Follow the procedure below to agitate each white cartridge before inserting it in the printer.
• Never agitate a white cartridge too rapidly or too vigorously.
• Handle the cartridge carefully during agitation to avoid damage or ink leaking.
• To avoid ink leakage, agitate the cartridge smoothly and firmly with excessive shaking.
Agitate a cartridge only as instructed below.
•
Hold the cartridge as shown below. Rotate the cartridges left to right for about 50 sec.
•
Insert all of the ink cartridges.
9.
There are two ink bay banks for the ink cartridges. On the right side of the printer towards the front
of the printer is the ink bay for KCMY. The first cartridge, closest to the front of the printer is the K
cartridge or Black, Then C or Cyan, Then M or Magenta, Then Y or Yellow
The ink bay towards the back of the printer is for white. The 1
W1 then W2
st cartridge is W1 then W2 then again
RICOH Ri 2000
User Manual
21