Ricoh Ri 2000 User Manual page 58

Place the medium platen on the table base
• Place the substrate on top of the table then place the table hoop back over the substrate and table
 Sleeve or dress the shirt on to the table so that only one piece of the garment is laying
flat on top of the table, pull garment from the sides, front and back to ensure no
wrinkles are present, Wrinkles may cause head strikes to occur (pre-press shirts prior
to printing to allow for a flatter surface)
 Note: Table hoop may not fit around thicker garments

Recommend Heat pressing the shirt for aprox. 10 Sec prior to printing to eliminate any wrinkles or fibers
sticking up. It is important to eliminate any wrinkles as this will affect print quality and also the auto
height function will always adjust to the highest point on the platen.
Now hit the Height Adjust button
RICOH Ri 2000
User Manual
58