Adjusting Table - Ricoh Ri 2000 User Manual

5.4 Adjusting Table

The printing indexing of the table can be adjusted. Typically you would not need to do this unless a
•
component was replaced such as the sub control board or the CTL board.
• If the print result shows horizontal lines and the nozzle check is perfect (no missing nozzles and no
nozzle deflection and the table height is correct), you need to do this function.
• Press the button of print position.
Find an appropriate adjustment value from the print result of adjustment patterns.
•
RICOH Ri 2000
User Manual
128