Adjusting Head - Ricoh Ri 2000 User Manual

• You can print the basic adjustment pattern. Also it's better to print it on the transparent A4 media
(such as OHP films ).
• And it is recommended using medium-sized platen.
• If a part of the media is raised, use tape to fix the four corners of the media.

5.3 Adjusting Head

Typically this adjustment will only be necessary after a part replacement such as a carriage or
CTL replacement.
- This function adjusts the print head alignment position. When the print result is not clear (for ex
ample, vertical lines are misaligned, or color is not clear. Print is fuzy) this adjustment may impro
ve the result. NOTE: Always check the table height 1
n most cases. If the printing surface is too far away from the head the prints will be fuzzy and the
lines may not appear straight
. The reading on the dial should be close 0 i
st
RICOH Ri 2000
User Manual
125