Ricoh Ri 2000 User Manual page 26

If there are nozzles missing, then Touch AUTO HEAD CLEAN button and clean the heads corresponding
to the numbers on the nozzle chart where the nozzles are missing. (More details on this later). After the
head clean is complete. Check the nozzle again to confirm that the nozzles are all present. Once all the
nozzles are present – you are ready to begin printing.
 NOTE: To power off, hold down the power button on the front near the LCD screen, for
more than 3 seconds and return the I/O switch to O (off)
The following screens will appear screen warnings will appear.
RICOH Ri 2000
User Manual
26