12. On the operation panel, press and hold the sub power button for more than 2 seconds.
13. After the printer turns on, the printer will go into a initialization and boot up routine the it will
begin charging with ink.
Initial charging takes about 23 minutes and the display will show a status percentage (%) until 100% is
reached.
•
Never open the top cover while the printer is charging.
If the top cover is opened accidentally while the printer is charging, just close the cover,
•
and then press and hold the sub power button for more than 2 sec.
14. When you see the Green "Ready" on the top left of the screen initial charging is finished and the
printer is ready to use.
RICOH Ri 2000
User Manual
23