Ricoh Ri 2000 User Manual page 127

Find a pattern with vertical lines on both sides are the straightest (or closest to this condition)
•
aligned in row A
• Note the value indicated over the pattern indicates an appropriate adjustment value.
An appropriate adjustment value is "+2". In this example
•
• Enter this value in the box for ROW A (up arrows make the value go up, down arrows make the value
go down)
Repeat this for the other rows in the test pattern (B, C, etc)
•
When there are no straight vertical side lines, like upper illustration, check the last square out of the
•
sequence of squares with the closest to a straight line
As upper illustration, the value is "+4".
•
After you have entered a value for all the rows, press the ALIGN button which sets the new values.
Reprint the pattern and repeat the above process
Repeat the process until all rows (A,B,C etc. ) show the 0 column or close to the 0 column shown as the
best value
You can always reset to the original settings by entering the factory reset button by going to the settings
tab and select OPTION
RICOH Ri 2000
User Manual
127