Ricoh Ri 2000 User Manual page 120

RICOH Ri 2000
User Manual
Remove rinse and drain the right ink sumps for white and color
Remove the bracket
Note: For the white right sump – you will need to remove the two screws that hold the bracket that
holds ribbon cables and push this bracket down out of the way so you can get at the screw that hold
s the sump hold down bracket.
Rotate the sump 90 deg counterclockwise and remove the right ink sump
Drain and clean the sumps
Install the right sump after draining by moving it in and rotating clockwise this time 90 degrees so
that the V grooves in the back of the sump slide onto the Alignment pins on the holding bracket.
120