Ricoh Ri 2000 User Manual page 111

Step 2 Open the Front Cover.
Step 3 Wipe off the old grease and lint stuck on the guide rod with a cleaning applicator for areas
where the grease has collected and a lint free wipe for the rest of the rods.
There are
To clean both two.
The guide rod: main
The guide rod: front
(Caution)
When cleaning the guide rods, try to avoid touching the encoder
or the carriage belt.
This can cause CR encoder error or other errors
Step 5 Apply Ricoh Grease Type G1 to the guide rods
Use new Cleaning Applicator(large) for application.
two guide rods "guide
Encoder
rod: front" and "guide
Cleaning applicator
Carriage Belt
Guide Rod: Main
RICOH Ri 2000
User Manual
rod: main".
111